Assembly Instruction
Two Step Bamboo
Stool with Automated Night lights
Step By Step
Easy Assembly
Step 1
Hold one of the two side boards and attach the lower step (the one that doesn’t have a handle hole) to it with two bolts using a screwdriver. Make sure the metal plates on the step face downwards and are closer to the front. Do not tighten the bolts at this step.
Step 2
Attach the support beam to the side board with one bolt. Do not tighten the bolt
Step 3
Attach the upper step (the one that has a handle hole) to the side board with two bolts. Do not tighten the bolts.
Step 4
Attach the other side board to the two two steps (with two bolts for each) and to the support beam (with one bolt). At this step, you can tighten the bolts, but make sure not to overdo it: stop when you feel resistance
Step 5
Tighten all the remaining bolts, but make sure not to overdo it: stop when you feel resistance.
Step 6
Stick the bolt covers onto the bolt heads all around the stool
Step 7
Flip the stool upside down and attach the four silicone feet to the bottom with the four screws using your screwdriver
Step 8
Optionally, install the anti-slip stickers: two on the lower step, and two on the upper step. Remove the protective layer from the stickers
Step 9
Use the switch to set the lamp’s mode: Up is Off, Mid is Auto, and Down is On.
Step 10
If you possess the LED light model with a button, please refer to these alternative instructions instead
- Quick press once to activate “constant light mode”.
- Quick press again: if the light blinks twice, it’s now in “Night sensing mode”, which only illuminates upon detecting motion in low light, ensuring optimal battery conservation.*
- Quick press again: if the light flashes four times, it’s now in “All day sensing mode,” turning on when it senses motion regardless of the surrounding light conditions.
- Quick press again to switch off the LED light.
- Long press to adjust the light brightness
*The lamp will stop working in bright environments but will work again in darker settings when it detects motion within 0 to 10 feet. It will automatically turn off after 20 seconds if no motion is detected.
