Assembly Instruction
Compact Two Step Stool
Compact Two Step Stool
Step By Step
Easy Assembly
Step 1
Hold one of the two side boards and attach the lower step (the one that doesn’t have a handle hole) to it with two bolts using a screwdriver. Make sure the metal plates on the step face downwards and are closer to the front. Do not tighten the bolts at this step.
Step 2
Attach the support beam to the side board with one bolt. Do not tighten the bolt
Step 3
Attach the upper step (the one that has a handle hole) to the side board with two bolts. Do not tighten the bolts.
Step 4
Attach the other side board to the two two steps (with two bolts for each) and to the support beam (with one bolt). At this step, you can tighten the bolts, but make sure not to overdo it: stop when you feel resistance
Step 5
Tighten all the remaining bolts, but make sure not to overdo it: stop when you feel resistance.
Step 6
Stick the bolt covers onto the bolt heads all around the stool
Step 7
Flip the stool upside down and attach the four anti-slip pads to the bottom
Step 8
Optionally, install the anti-slip stickers: two on the lower step, and two on the upper step. Remove the protective layer from the stickers
